The Anker SOLIX PS100 Bifacial Portable Solar Panel is a lightweight, foldable 100W panel designed to charge compatible portable power stations at home, while travelling or during outdoor use.
The bifacial design generates power from both the front and rear surfaces of the panel, providing up to 10% additional output in reflective environments such as sand, snow or concrete. Advanced N-type solar cells provide 25%+ conversion efficiency, while the lightweight folding design has a listed weight of just 2.8 kg for easier transport and setup.
The reinforced aluminium frame and impact-resistant construction are designed for outdoor use. The panel carries an IP68 water and dust resistance rating; however, Anker advises against exposing it to heavy rain or submerging it in water.
Harness solar energy with a rated output of 100W and recharge a compatible Anker SOLIX portable power station while camping, travelling or spending time away from mains electricity. Actual solar output will vary depending on sunlight, panel positioning, angle and environmental conditions.
What’s in the box: 1. Anker SOLIX PS100 Bifacial Portable Solar Panel, 2. 2.5 m solar charging cables, 3. 0.5 m XT60i solar charging cable, 4. Quick start guide, 5. Safety card.
| Product | Anker SOLIX PS100 Bifacial Portable Solar Panel |
|---|---|
| Size | Folded: 51 × 60 × 6.4 cm Unfolded: 103 × 60 × 1.7 cm |
| Weight | 2.8 kg |
| Rated Power | 100W |
| PV Output | 21.6V DC / 4.63A |
| Solar Cell Type | N-type bifacial solar cells |
| Conversion Efficiency | 25%+ |
| VOC – Open Circuit Voltage | 27V* |
| ISC – Short Circuit Current | 4.86A** |
| Water and Dust Resistance | IP68*** |
| Warranty | 5 years |










