EcoFlow Alternator Charger XT60 Output Cable (1m)
The EcoFlow Alternator Charger XT60 Output Cable (1m) is an official accessory that connects a compatible EcoFlow Alternator Charger to an EcoFlow or third-party portable power station equipped with an XT60 input port.
It provides a convenient charging connection for power stations that accept charging through an XT60 DC input and is ideal as a replacement or spare cable.
Designed for XT60 charging
The cable connects the Portable Power Station Port on a compatible EcoFlow Alternator Charger directly to the XT60 input on a compatible portable power station.
When used with this cable, the charger operates in Charge Mode only.
Compatibility
The XT60 Output Cable is compatible with EcoFlow and third-party portable power stations fitted with an XT60 input port.
If your vehicle starter battery or RV house battery operates at 24V, the connected power station must support an XT60 input voltage above 48V.
| Compatible with | Details |
| EcoFlow Alternator Charger | Compatible as an XT60 output cable |
| EcoFlow portable power stations | Models equipped with an XT60 input port |
| Third-party portable power stations | Models equipped with an XT60 input port |
| 24V vehicle systems | The connected XT60 input must support more than 48V input voltage |
Operation
With the XT60 Output Cable installed, the EcoFlow Alternator Charger supports charging only, with a maximum charging output of 500W, subject to the input rating of the connected power station.
Reverse Charge Mode and Battery Maintenance Mode are not supported when using the XT60 Output Cable.
Specifications
| Specification | Details |
| Product | EcoFlow Alternator Charger XT60 Output Cable |
| Length | 1 metre |
| Connector | XT60 |
| Function | Charging connection between a compatible EcoFlow Alternator Charger and a portable power station with an XT60 input |
| Maximum charging power | Up to 500W (subject to the connected power station’s XT60 input rating) |
Please note: This cable is designed for charging only. Reverse Charge Mode and Battery Maintenance Mode require a communication output cable and are not supported with the XT60 Output Cable.
